Skip to main content

Quick Start Guide

NOTE: don’t use root account login service to complie the SDK

1 SDK source code

https://drive.google.com/drive/folders/1UD5NQBumgo-Rm7zmsxyRAELx2nQHn3Tc?usp=drive_link

2 Untar file

mkdir Rockcip_Android11 
cat px30-android11.tar.gz* | tar -zx -C Rockcip_Android11 
cd Rockcip_Android11

3 One-key compliation

source ./build/envsetup.sh;lunch PX30_Android11-userdebug; 
./build.sh -AUKu

NOTE: Install with "apt install" if there are compilation dependencies

4 Firmware Location

The firmware will be generated to location: rockdev/Image-PX30_Android11//update.img

5 Image Upgrade

5.1 Upgrade Tool​

Upgrade tool：AndroidTool_Release_v2.69

Upgrade driver：DriverAssitant_v4.91

Use the upgrade tool, must first exe DriverInstall.exe in DriverAssitant_v4.91

img

5.2 Go into Upgrade Mode by ADB Switch​

  1. Connect the OTG port to the burning computer USB port, it's also act as POE power supply
  2. click ADB switch in AndroidTool

img

5.3 Go into Upgrade Mode by Serial​

  1. Connect the OTG port to the burning computer USB port, it's also act as 5V power supply
  2. Press "Ctrl+C" when uboot is booting up, to enter uboot:

img

  1. comand to reboot the board into maskrom mode, for a complete "update.img" upgrade.

img

4."rockusb 0 mmc 0" command to reboot board to loader mode, for a partial firmware upgrade or a complete "update.img" upgrade.

img

5.4 The Entire Package of Firmware "update.img" Upgrade​

img

5.5 Upgrade the Firmware Separately​

img

6 Start up

Plug in the USB, connect it to the USB port of the computer, and the system will start ADB after the device is started (about 1 minute)

7 Install total control

The software is in the current folder Total_Control_8_0_u10_install_x64.zip

8 Open total control

Open total control after system startup (be sure to open after system startup, otherwise close and restart), wait until total control apk is installed and click Connect

img

9 Log in to the Android11 screen

img

10 Configuration wifi

  1. Open configuration

img

  1. Network internet

    img

  1. Connect network

img

  1. LTE

    Plugin Sim Card，LTE will autodial

  2. Bluetooth

1）Click connected Devices

img

2）Click Connection preferences

img

3）Click Bluetooth

img

4）Click Pair new device

img

img